News

  • 0
  • 0

TR75 7.5 kW CLC Foam Generator for Lightweight Concrete

Since the beginning of this year, people around the world have felt the pressure of rising prices. Not only the rise in oil prices but also different industries have seen soaring prices. According to the latest data, from August 2021 to the present, the inflation rate in the United States has risen for 6 consecutive months, and this data has soared from the previous 5.3% to 7.9% today. Inflation in the United States, the global Many countries have been affected.
According to experts' forecasts, the inflation rate in the United States may exceed 10% this year, which will face the danger of collapse, which has a great impact on global inflation, including Concrete Foaming Generator.

Foam Concrete Machine is the core equipment of foam concrete production, which has a significant impact on the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output but more importantly, the quality of the foam produced is outstanding. TR75 portable foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.

 

Parameters of TR75 CLC Foam Generator

ModelTR75
Maximum foam output(m3/h):7.5
Motor voltage(V) : 380
Work rate(KW):7.5
Foaming speed(L/m):300
Bubble bleeding(kg/m3):70
Dimensions(cm):1200*700*1000
Weight(kg):300


Benefits of TR75 CLC Foam Generator:

(1) The foam produced is uniform, which helps improve the strength and thermal insulation performance of foam concrete. The foam is uniform, the foam is not easy to be broken in the slurry, the amount of foam is small, and a high closed cell ratio can be formed. The foam is evenly distributed in the mud, which can increase the strength of the foamed concrete;

(2) Low foam density. TR75 portable foam generator has low foam density and saves foaming agent. In the case of the same dilution factor of the foaming agent, the thickness of the foam produced by this machine is 20-40 g/L, and different foaming agents have various dilution factors;

(3) Simple operation, low failure rate, precision parts are selected to reduce the use of wearing pieces, the failure rate is lower, the service life is longer, and one-button control is realized.

 

Note:

(1) The foaming liquid suction pipe is about 1.5m long. Be careful not to remove the filter to prevent impurities from blocking the pump;

(2) Foaming volume: The maximum foaming volume is about 100L/min. The foaming agent used will affect the amount of foaming. The value of 100L/min is the value measured after the company's foaming agent is diluted 60 times;

(3) About making foam concrete: You can use a mixing bucket to make pulp, and then directly foam the foam on top of the slurry. After stirring, the slurry can be mixed with foam to form foam concrete. Take care to minimize the foam stirring time and stir at low speed.


Model:TR75
Maximum foam output(m3/h): 7.5
Motor voltage(V) : 380
Work rate(KW): 7.5
Foaming speed(L/m): 300
Bubble bleeding(kg/m3):70
Dimensions(cm): 1200*700*1000
Weight(kg):300
With Tesla's new factory in Germany starting production, Volkswagen is just weeks away from finalizing plans for its 2 billion euro ($2.2 billion) electric car factory, which it hopes will bring it closer to its U.S. competitor. Tesla says it takes just 10 hours to produce a Model Y at its new factory in Grunheide, near the German capital, while Volkswagen takes three times as long to produce its ID.3 electric car. Volkswagen's productivity has been increasing by around 5 percent a year, said Christian Vollmer, head of the production at the Volkswagen brand.
The improvement in the efficiency of production vehicles will bring opportunities for Concrete Foaming Generator. In the future, the demand for Concrete Foaming Generator will become more and more extensive. Please feel free to contact us for the latest news on Concrete Foaming Generator.

Inquiry us

Our Latest News

Introduction to the Magnesium Ingot

Magnesium Ingot Introduction From the various metals that are used to make dies that magnesium is the most popular. Its qualities make it attractive for die-casters and other end-users. It is used to make sturdy and light aluminum-magnesium alloys.…

What is Potassium stearate

What's Potassium stearate ? Potassium stearate may also be referred for its alias "potassium octadecanoate". White crystalline powder. It is soluble in hot water and insoluble in ether, chloroform or carbon disulfide. The aqueous solution tends to be…